Different combination of M.2 SSD and Motherboard will lead to different orientation of the SSD.
This installation guide refers to a M.2 module with M key with socket located on the right-hand side.
Ensure the SSD is correctly oriented, place the heatsink on its top surface, and align the heatsink edges with the SSD connector edge.
Ensure the SSD is correctly oriented, place the heatsink on its top surface, and align the heatsink edges with the SSD connector edge.
Removal
Attention
It is recommended to wear safety gloves for the removal procedure to avoid any hand injury.
Attention
Removing M2 Pro with a screwdriver could possibly leave scratch mark on the inside surface of heatsink.
Insert the tip of a small flat head screwdriver between the two halves of the cooler on the side located at the top of the ARCTIC logo. Gently twist and leverage to separate the two parts of the cooler.
Packaging Content
Preparation
Different combination of M.2 SSD and Motherboard will lead to different orientation of the SSD.
This installation guide refers to a M.2 module with M key with socket located on the right-hand side.
Installation
Ensure the SSD is correctly oriented, place the heatsink on its top surface, and align the heatsink edges with the SSD connector edge.
Removal
Attention
It is recommended to wear safety gloves for the removal procedure to avoid any hand injury.
Attention
Removing M2 Pro with a screwdriver could possibly leave scratch mark on the inside surface of heatsink.
Insert the tip of a small flat head screwdriver between the two halves of the cooler on the side located at the top of the ARCTIC logo. Gently twist and leverage to separate the two parts of the cooler.
support.arctic.de uses cookies, to give its readers the best website experience. In addition, some cookies are also set by third party services. Further information can be found in the Privacy Policy.
I accept
If you accept the cookies from ARCTIC but not the tracking using Google Analytics, please click here to accept.
Attention
