言語
English
Deutsch
Français
Español
Italiano
Русский
čeština
Polski
Português
中文
عربي
日本の
한국인
Türkçe
Svenska
Nederlands

申し訳ございませんが、このドキュメントは日本語版では提供されておりません。下記に英語版を掲載いたします。

Required Tools

Philips Head Screwdriverl PH2 Philips Head Screwdriver

Packaging Content
Freezer 36 A-RGB Rev 6
Preparation
Freezer 36 A-RGB Rev 6
Installation
Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

Refer here to learn more about how to apply thermal pastes.

Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6
Freezer 36 A-RGB Rev 6

The fans can be rotated to aid cable management

Freezer 36 A-RGB Rev 6
Freezer 36 A-RGB Rev 6

The fans can be rotated to aid cable management

Freezer 36 A-RGB Rev 6
Freezer 36 A-RGB Rev 6
Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

To get the best out of your cooler, it is recommended to adjust the fan speed control in the BIOS, follow this guide to adjust your PWM.

Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

To get the best out of your cooler, it is recommended to adjust the fan speed control in the BIOS, follow this guide to adjust your PWM.

Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

To take full advantage of your A-RGB products, check out the A-RGB Setup Guide.

Required Tools

Philips Head Screwdriverl PH2 Philips Head Screwdriver

T20 Screw driver T20 Screwdriver (Included in packaging)

Packaging Content
Freezer 36 A-RGB Rev 6
Contact Frame Installation

Attention

Secure the socket backplate in one of the 2 ways shown below depending on the status of your motherboard.

    Is the motherboard outside of the case?

  • Yes
  • No

To support the socket backplate, place it on a flat, horizontal surface, like a thick padding (e.g., the packaging inner card)

Freezer 36 A-RGB Rev 6

Open the Independent Loading Mechanism (ILM), align and place the CPU into the socket

Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

Attention

Keep the removed parts for reassembly in the future. The ILM must be reinstalled if the motherboard is to be returned for service or warranty.

Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

Attention

The CPU Contact Frame is made to be compatible with both LGA1851 and LGA1700 CPUs, select below to see your CPU fitment.

Align the CPU in the middle of the cutout on the CPU Contact Frame, there should be gaps (highlighted in red) on the left and right side of the CPU.

Freezer 36 A-RGB Rev 6

Align the CPU to the top edge of the cutout on the CPU Contact Frame, there should be a gap (highlighted in red) below the CPU.

Freezer 36 A-RGB Rev 6
Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

Warning

Loosely engage all 4 screws by 2 turns before tightening them in a cross pattern evenly to avoid damaging the CPU.

Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

The thick padding can be removed after the CPU Contact Frame is tightened.

Apply painter’s tape on the backside of the motherboard to secure the socket backplate. Lay the PC case flat on a horizontal surface.

Freezer 36 A-RGB Rev 6

Open the Independent Loading Mechanism (ILM), align and place the CPU into the socket

Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

Attention

Keep the removed parts for reassembly in the future. The ILM must be reinstalled if the motherboard is to be returned for service or warranty.

Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

Attention

The CPU Contact Frame is made to be compatible with both LGA1851 and LGA1700 CPUs, select below to see your CPU fitment.

Align the CPU in the middle of the cutout on the CPU Contact Frame, there should be gaps (highlighted in red) on the left and right side of the CPU.

Freezer 36 A-RGB Rev 6

Align the CPU to the top edge of the cutout on the CPU Contact Frame, there should be a gap (highlighted in red) below the CPU.

Freezer 36 A-RGB Rev 6
Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

Warning

Loosely engage all 4 screws by 2 turns before tightening them in a cross pattern evenly to avoid damaging the CPU.

Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

The painter’s tape applied to the backplate can be removed after the CPU Contact Frame is tightened.

Installation
Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

Refer here to learn more about how to apply thermal pastes.

Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6
Freezer 36 A-RGB Rev 6

The fans can be rotated to aid cable management

Freezer 36 A-RGB Rev 6
Freezer 36 A-RGB Rev 6

The fans can be rotated to aid cable management

Freezer 36 A-RGB Rev 6
Freezer 36 A-RGB Rev 6
Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

To get the best out of your cooler, it is recommended to adjust the fan speed control in the BIOS, follow this guide to adjust your PWM.

Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

To get the best out of your cooler, it is recommended to adjust the fan speed control in the BIOS, follow this guide to adjust your PWM.

Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6 Freezer 36 A-RGB Rev 6

To take full advantage of your A-RGB products, check out the A-RGB Setup Guide.

support.arctic.deは、読者の皆様に最高のウェブサイト体験を提供するためにCookieを使用しています。また、一部のCookieはサードパーティのサービスによっても設定されます。詳しくは、プライバシーポリシーをご覧ください。.

承諾します

ARCTIC からの Cookie は受け入れるが、Google Analytics を使用した追跡は受け入れない場合は、ここをクリックして受け入れてください。